E600H
GNSS Receiver
The E600 receiver can track all current satellite constellations and signals, including GPS/GLON-ASS/BEIDOU/GALILEO/QZSS, etc. The new generation of Athena RTK engine effectively improves RTK initialization success rate and initialization accuracy in harsh environments, and supports long-baseline RTK solution, which is an effective guarantee for high-efficiency and high-precision RTK operations.
Multi-constellation satellite tracked
GPS,GLONASS,BDS,GALILEO,SBAS,QZSS
Built-in radio supports more protocols
Transmit power 1W, effective working distance is 5km in the
optimal work environment.
Intelligent dual battery
Support up to 10 hours of work time, battery power can be read directly from the indicator light on the bat
Built-in 4G network module
More stable network communication.
Web UI
Access the Web page, complete the receiver configuration,
download data, upgrade firmware, view status, etc. through the
mobile phone, tablet and other handheld devices.
Tilt survey
The E600 receiver integrates an electronic bubble sensor,
combined with a new tilt survey algorithm and surpad software
operation. No calibration is required before measurement, the
accuracy of coordinate data can be easily achieved within 30 °
tilt angle.
|
GNSS |
|
|
Satellites Tracking |
GPS: L1CA/L1P/L1C/L2P/L2C/L5 BDS: B1I/B2I/B3I/B1C/B2a/B2b/ ACEBOC GLONASS: G1/G2/G3, P1/P2 GALILEO: E1/E5a/E5b/E6/ALTBOC QZSS: L1CA/L1C/L2C/L5/LEX IRNSS: L5 SBAS: L1, L5 L-Band: Atlas H10/H30/Basic |
|
Channels |
800 |
|
Signal Reacquisition |
< 1 sec |
|
Cold Start |
< 60 sec |
|
Warm Start |
< 30 sec |
|
Hot Start |
< 10 sec |
|
RTK Signal Initialization |
< 8 sec |
|
Initialization Reliability |
> 99.9% |
|
Update Rate |
10 Hz standard, up to 50 Hz |
|
Operation System |
Linux |
|
Internal Memory |
8 GB |
|
Performance |
|
|
High Precision Static |
H: 2 mm + 0.1 ppm V: 3 mm + 0.4 ppm |
|
Static/Fast Static |
H: 2.5 mm + 0.1 ppm V: 3.5 mm + 0.4 ppm |
|
RTK |
H: 8 mm + 1 ppm V: 15 mm + 1 ppm |
|
Code Differential |
H: 0.25 m V: 0.45 m |
|
SBAS |
H: 0.3 m V: 0.6 m |
|
L-Band |
Atlas H10: 4 cm RMS Atlas H30: 15 cm RMS Atlas Basic: 30 cm RMS |
|
Power Supply |
|
|
Battery |
Rechargeable and built-in Lithium-ion battery, 7.2 V ~ 6800 mAh |
|
Voltage |
9~28 VDC with over-voltage protection |
|
Working Time |
Up to 12 hours |
|
Charging Time |
Typically 4 hours |
|
Internal Radio |
|
|
Type |
TX and RX |
|
Frequency Range |
410 ~ 470 MHz, 902.4 ~ 928 MHz |
|
Channel Spacing |
12.5 KHz / 25 KHz |
|
Emitting Power |
1 W |
|
Operation Range |
3 ~ 5 Km typically 10 Km with optimal conditions |
|
Protocol |
Satel, PCC, TrimTalk, TrimMark III, South, HiTarget |
|
Internet Modem |
|
|
Support Band |
Global GSM /WCDMA/LTE |
|
Communication |
|
|
Bluetooth |
BT 5.0 + EDR, BLE |
|
WIFI |
802.11 b/g/n |
|
SIM Card |
SIM card |
|
5-pin Port |
Connect to external radio and power, NMEA output |
|
Type-C Port |
Charge and internal storage access |
|
TNC Port |
Connect to internal radio antenna |
|
Web UI |
View status, update firmware, set up working mode, download data |
|
Intelligent Voice |
Broadcast working status |
|
NMEA Output |
GGA, ZDA, GSA, GSV, GST, VTG, RMC, GLL, Binary |
|
Correction Data |
CMR, CMR+, RTCM2, RTCM3, RTCM32 |
|
MEMS |
Fast initialization, dynamic tilt survey up to 60° |
|
Physical |
|
|
Dimension |
Φ148 mm x H74.5 mm |
|
Weight |
1.06 kg |
|
Operating Temperature |
-40℃ ~ +65℃ |
|
Storage Temperature |
-45℃ ~ +80℃ |
|
Water/Dust Proof |
IP67 |
|
Shock |
Survive a 2 m drop on concrete floor |
|
Vibration |
Vibration resistant |
|
Humidity |
Up to 100% |
|
Indicators |
Battery |
|
Button |
Power button |
|
Certificate |
CE, FCC, NGS Calibration |
Related Products
E300 Pro
Full-featured RTK Receiver
E300 Pro is a new generation product by eSurvey GNSS. The durable IP67 design makes it possible to work in various of environments. Multi constellation and frequency tracking always gives a Fixed solution for your job. Thanks for the small-size design, E300 Pro is suitable for different applications such as car and machine control.
M1G2
Portable Heading Solution
M1G2 is suitable for monitoring, machine control and CORS reference station. It has rich data streams such as radio, serial port, Bluetooth, WIFI and 4G network. User can use any phone or tablet to configurate device easily from the powerful Web UI.
ET2A
Theodolite
ET2A is a high precision electronic theodolite. This device has 2 “angle measurement accuracy and 30x magnification effect to meet various of working requirement.
E800C
HIGH-PERFORMANCE GNSS RECEIVER
The eSurvey 800 is a high-performance product by eSurvey GNSS. The durable IP67 design makes it possible to work in various of environments. Multi constellation and frequency tracking always gives a Fixed solution for your job. The colorful touch screen is convenient for quick configurations.
E300C Pro
FULL-FEATURED GNSS RECEIVER
The eSurvey E300 Pro is a fully functional GNSS receiver with extremely compact design by eSurvey GNSS. With its high-performance GNSS board, it can track all present constellations and satellites. The GNSS, Wi-Fi, Bluetooth and GSM four in one antenna, stable data transmission, RTK assistant and IMU function, make it suitable for all surveying applications.
NET10
Portable CORS Solution
NET10 is specially designed for user who needs to set up reference stations. With the 3D choke-ring antenna, the device provides stable correction data to the rover. Integrated with Bluetooth, WIFI, Web UI, ethernet and serial port, NET10 brings possibility for more applications.
ESL2
Precise Automatic Level
ESL2 is used in geodetic control, construction of roads and industrial applications. The ESL2 with ESM1 can supply higher accuracy and be used in monitoring structural deformation etc. The use of automatic compensator speeds up work and improves accuracy. ESL2 supply the possibility to operate in the temperature from -30℃ to +50℃.
E3 & E3L
Total Station
E3 / E3L is a high precision manual total station, with accurate angle and distance measurement. It can work reliably and deliver accurate results even in harsh environments. And its simple operations make most survey and stakeout tasks more easily and efficiently.
E800H
High-performance RTK Receiver
E800 is a high-performance product by eSurvey GNSS. The durable IP67 design makes it possible to work in various of environments. Multi constellation and frequency tracking always gives a Fixed solution for your job. The colorful touch screen is convenient for quick configurations.
NET20 PLUS
High-quality CORS Solution
NET20 PLUS is specially designed for high-precision CORS reference stations. The rich data interface demands various of applications such as monitoring and machine control. User can use any phone or tablet to configurate device easily from the powerful Web UI.
ESL3
Auto Level
ESL3 is equipped with a magnetic damping compensation system which has a large compensation range and a high compensation accuracy compensator to ensure the equipment accuracy and measurement efficiency even in complex environment subject to vibration or shock. 32 times magnification, 38mm large clear aperture equipped with 550nm coating ensuring fast and smooth measurement. The all-metal body and IP66 design ensure ESL3 strong environmental adaptability.
E600C
RUGGED & ALL-FUNCTIONAL GNSS RECEIVER
The eSurvey E600 is an innovative GNSS receiver that delivers unmatched GNSS performance, speed and accuracy to improve your productivity. The dual rechargeable and removable batteries make no interruption to your surveying work. The E600 is perfect for survey professionals who need to collect highly accurate data in a wide range of geospatial applications.